OSI Engineering hiring Electrical/Design Engineer for an XRAY Food Inspection Manufacturing company in Morgan Hill, CA in Morgan Hill, CA | LinkedIn (2024)
Electrical/Design Engineer for an XRAY Food Inspection Manufacturing company in Morgan Hill, CA
OSI EngineeringMorgan Hill, CA
OSI Engineering Morgan Hill, CA
18 hours ago
See who OSI Engineering has hired for this role
Save job
Welcome back
Sign in to save Electrical/Design Engineer for an XRAY Food Inspection Manufacturing company in Morgan Hill, CA at OSI Engineering.
Report this job
OSI Engineering provided pay range
This range is provided by OSI Engineering. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more.
Base pay range
$80,000.00/yr - $120,000.00/yr
Direct message the job poster from OSI Engineering
Owen Williamson
Owen Williamson
Technical Recruiter at OSI Engineering
Electrical/Design Engineer for an XRAY Food Inspection Manufacturing company in Morgan Hill, CA
Summary
You will join a hardware team to provide best-in-class electrical design and support documentation for food industry equipment.
The ideal candidate will have experience with X-ray equipment in the food industry.
Equipment will be delivered to food industry locations with extreme environments, including washdown areas and areas with high humidity.
The Electrical/Design Engineer will be a critical new member of a small team with plans for future growth.
You will start with a mentor and eventually have the opportunity for upward mobility.
The team has service technicians out in the field and will require 10-20% travel for support if service technicians cannot resolve an issue.
Responsibilities
This role will take full responsibility for the electrical work.
You will be responsible for both the design portion and the builds.
Works under the direction of the director of Hardware Engineering
On a task basis, is responsible for preparing and completing discipline engineering designs and supporting documentation such as design criteria, calculations, drawings and specifications.
Perform engineering calculations to source key electrical and electromechanical components such as power supplies, relays, breakers, and fusers, safety controllers, VFDs, and I/O interfaces, as well as proper wire sizing.
Design power distribution and control circuits for X-ray equipment for use in the food industry.
Design Safety circuits for CAT III and PL-4 rated compliance.
Produce Wiring Schematics using Autodesk AutoCAD software.
Ensure all designs are compliant with regulatory Standards (UL 61010, UL 508A, CSA, CE, etc.) and Manage 3rd party testing labs to obtain compliance certifications.
Design proper grounding and wire shielding to eliminate electrical noise and EMI/EMC emissions.
Work with the Mechanical Design team to lay out Electrical Panels.
Assist in building prototypes and production machines by working directly with the co-manufacturer.
Will be responsible for tier 2 support when the service technician needs assistance.
Oversee and physically perform testing of prototypes and new designs to ensure functional specifications are obtained.
Produce BOM using Autodesk Upchain Software.
Produce technical documents including work instructions, Set up instructions, and operator manuals.
Identifies conflicting design or schedule requirements and generates
Project Deviation Notices in a timely fashion.
Required Skillsets:
5+ years of experience as an electrical engineer.
Solid experience using AutoCAD
Familiar with UL and CSA compliance Standards
Ability to get hands dirty doing wiring to help with control builds.
AutoCAD 2D experience to do electrical schematics and wiring diagrams.
Schematic, electrical engineering
10-20% travel for support if service technicians cannot resolve an issue.
Word, Excel, Power point
Preferred Skillsets:
Experience with X-ray equipment in the food industry
Strong knowledge of electrical safety. Category three and performance level four design safety circuits are a big plus.
EMC EMI and electrical noise knowledge
Familiarity with UL and CSA compliance standards is also preferred.
Regulatory Standards (UL 61010, UL 508A, CSA, CE, etc.)
Bachelor’s in electrical engineering or similar discipline
Location: Morgan Hill, CA (100% onsite)
Position type: Full-time
Salary: DOE, options and benefits
Seniority level
Not Applicable
Employment type
Full-time
Job function
Engineering
Industries
Food and Beverage Manufacturing
Referrals increase your chances of interviewing at OSI Engineering by 2x
See who you know
Get notified about new Electrical Design Engineer jobs in Morgan Hill, CA.
Hobby: Calligraphy, Rowing, Vacation, Geocaching, Web surfing, Electronics, Electronics
Introduction: My name is Msgr. Benton Quitzon, I am a comfortable, charming, thankful, happy, adventurous, handsome, precious person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
